Chevrolet Sonic Owner's Manual: Securing an Add-On Child Restraint in the Vehicle
A child can be seriously injured or killed in a crash if the child restraint is not properly secured in the vehicle. Secure the child restraint properly in the vehicle using the vehicle safety belt or LATCH system, following the instructions that came with that child restraint and the instructions in this manual.
To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child restraint systems must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system. See Lower Anchors and Tethers for Children (LATCH System).
Children can be endangered in a crash if the child restraint is not properly secured in the vehicle.
When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer.
Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in the vehicle— even when no child is in it.
In some areas of the United States and Canada, Certified Child Passenger Safety Technicians (CPSTs) are available to inspect and demonstrate how to correctly use and install child restraints. In the U.S., refer to the National Highway Traffic Safety Administration (NHTSA) website to locate the nearest child safety seat inspection station. For CPST availability in Canada, check with Transport Canada or the Provincial Ministry of Transportation office.
Child Restraint SystemsRear-Facing Infant Seat A rear-facing infant seat provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts t ...
Cylinder Head Installation
Special Tools EN-45059 Torque Angle Sensor Kit For equivalent regional tools, refer to Special Tools. Clean the sealing surfaces. Inspect for plane surface. Cylinder block, cylinder head Straight-edge, feeler gauge Install the cylinder head gasket. Install the cylinder head. ...
Air Inlet Grille Panel Replacement
Air Inlet Grille Panel Replacement Callout Component Name Preliminary Procedure Remove both wiper arm assemblies. Refer to Windshield Wiper Arm Replacement. Remove both outer hood rear seals.