Mazda 3 Owners Manual: Call Interrupt
A call can be interrupted to receive an incoming call from a third party.
Whenis selected or the pickup
button on the steering wheel is pressed, the current call is held and the system switches to the new incoming call.
Whenis selected, the current
call is ended and the system switches to the new incoming call (GSM network only).
Whenis selected or the hang-up
button on the steering wheel is pressed, an incoming call is refused.
- The function may not be available depending on the contractual content of the mobile device.
- The function may not be operable depending on the type of the telephone network and the mobile device.
Receiving an Incoming CallWhen an incoming call is received, the incoming call notification screen is displayed. The “Incoming Call Notifications” setting must be on. Refer to Communication Settings on . To accept the ...
Starter Inspection [Mzr 2.0, Mzr 2.5]
On-vehicle Inspection 1. Verify that the battery is fully charged. 2. The starter is normal if it rotates smoothly and without any noise when the engine is cranked. If the starter does not operate, inspect the following: Remove the starter, and inspect the starter unit. ...
Fuel Pump Control Module Inspection [Skyactiv G 2.0]
1. Perform the KOEO self-test.. 2. Verify that a fuel pump control module related DTC is detected.. If DTCs are detected, repair the malfunctioning part according to the applicable DTC troubleshooting.. If a DTC is not detected, go to the next step. 3. Inspect the followin ...
Windshield Defrosting and Defogging
Set the mode selector dial to the position and turn the fan control dial to the desired speed. In this position, the outside air position is automatically selected, and when the fan control dial is ON, the air conditioner automatically turns on.