Mazda 3 Owners Manual: Home screen
Vacuum Line Inspection
MZR 2.0, MZR 2.5, MZR 2.3 DISI Turbo 1. Remove the vacuum hose.. 2. Verify that air can be blown from the power brake unit side of the vacuum hose towards the intake manifold side, and that air cannot be blown in the opposite direction. If there is any malfunction of the inner che ...
ABS HU/CM Inspection
1. Disconnect the ABS HU/CM connector.. 2. Connect the negative battery cable.. 3. Attach the tester lead to the ABS HU/CM wiring harness-side connector and inspect the voltage, continuity, or resistance according to the standard (reference value) in the table below. Standard (reference) ...
Blower Motor Removal [Manual Air Conditioner]
NOTE: The blower motor is located on the A/C unit as shown in the figure. Perform the work from the front passenger side in the posture shown in the figure. 1. Set the air intake mode to FRESH. 2. Disconnect the negative battery cable. 3.