Mazda 3 Owners Manual: Outside Temperature Display

Mazda 3 Owners Manual: Outside Temperature Display

When the ignition is switched ON, the outside temperature is displayed.

Mazda 3. Outside Temperature Display


NOTE Under the following conditions, the outside temperature display may differ from the actual outside temperature depending on the surroundings and vehicle conditions:

  • Significantly cold or hot temperatures.
  • Sudden changes in outside temperature.
  • The vehicle is parked.
  • The vehicle is driven at low speeds.

The outside temperature unit can be switched between Celsius and Fahrenheit using the following procedure.

  1. Press the INFO button with the ignition switched off and continue pressing the INFO button for 5 seconds or longer while switching the ignition ON. The outside temperature display flashes.
  2. Press the upor down
    part of the
    INFO switch to change the outside temperature unit.
  3. Press and hold the INFO button for 3 seconds or longer while the outside temperature display is flashing. The outside temperature display illuminates.
Dashboard Illumination
When the position lights are turned on with the ignition switched ON, the brightness of the instrument panel illumination is dimmed. NOTE When the position lights are turned on, the position lig ...
Other materials:

Brake Fluid Pressure Sensor Inspection
1. Switch the ignition to off. 2. Install the SSTs to the master cylinder (secondary side) as shown in the figure. NOTE: When installing the SST (49 D043 0A0) to the master cylinder, use a commercially available flare nut wrench (flare nut across flat 12 mm {0.47 in}). ...

Hole Cover Removal/Installation
With Car-navigation system 1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Upper column cover. b. Instrument cluster. c. Center panel. d. Center cover. e. Dashboard upper panel. f. Multi information display. 3. Pull the hole cover in the direction of arr ...

Vanity Mirror Illumination Inspection
1. Disconnect the negative battery cable.. 2. Remove the sunvisor.. 3. Verify that the continuity between the vanity mirror illumination terminals is as indicated in the table. If not as indicated in the table, inspect the bulb.

Related news

  • Subaru Legacy: Child safety
  • Kia Soul: Vehicle handling instructions
  • Buick LaCrosse: Blizzard Conditions
  • Buick Regal: Fog Lamps
  • Toyota Highlander Owners Manual: Detailed bluetoothsystem settings

  • Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display

    Mazda 3 Owners Manual: Outside Temperature Display