Nissan Rogue Service Manual: Power supply and ground circuit

Nissan Rogue Service Manual: Power supply and ground circuit

Diagnosis Procedure

Regarding Wiring Diagram information, refer to PCS-24, "Wiring Diagram".

1. CHECK FUSE AND FUSIBLE LINKS

Check that the following IPDM E/R fuse or fusible links are not blown.

Check fuse and fusible links

Is the fuse blown? YES >> Replace the blown fuse or fusible link after repairing the affected circuit.

NO >> GO TO 2.

2. CHECK BATTERY POWER SUPPLY CIRCUIT

  1.  Disconnect IPDM E/R connector E118.
  2.  Check voltage between IPDM E/R connector E118 and ground.

Check battery power supply circuit

Is the inspection result normal? YES >> GO TO 3.

NO >> Repair or replace harness or connectors.

3. CHECK GROUND CIRCUIT

  1.  Disconnect IPDM E/R connectors E119, E120 and E121.
  2.  Check continuity between IPDM E/R connectors and ground.

Check ground circuit

Is the inspection result normal? YES >> Inspection End.

NO >> Repair or replace harness or connectors.

U1000 CAN COMM CIRCUIT
Description CAN communication allows a high rate of information transmission through the two communication lines (CAN-H line and CAN-L line) connecting various control units in the system. Each ...
Parking brake switch
Component Function Check 1.CHECK PARKING BRAKE SWITCH OPERATION Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated. Is the inspection result normal? ...
Other materials:

Removal and installation
BCM (BODY CONTROL MODULE) Removal and Installation For removal and installation of the BCM (Body Control Module), refer to BCS-75, "Removal and Installation". PUSH-BUTTON IGNITION SWITCH Removal and Installation REMOVAL  Remove NATS antenna amp. Refer to SEC-110, "Remo ...

C1115 ABS sensor [abnormal signal]
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1115 ABS SENSOR [ABNORMAL SIGNAL] When difference in wheel speed between any wheel and others is detected while the vehicle is driven because of installation of ti ...

Power panoramic moonroof (if so equipped)
The moonroof will only operate when the ignition switch is placed in the ON position. The moonroof is operational for a period of time, even if the ignition switch is placed in the ACC (if so equipped) or OFF position.

Related news

  • Nissan Maxima: Owners ManualService Manual order information
  • Toyota Tacoma 2015-2018 Service Manual: Door Lock
  • Chevrolet Sonic Repair Manual: Steering Angle Sensor Centering
  • Coolant temperature low indicator lightCoolant temperature high warning light
  • Nissan Sentra Service Manual: System description

  • Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit

    Nissan Rogue Service Manual: Power supply and ground circuit