Toyota Camry: Emergency start function (vehicles with a smart key system)
When the engine does not start, the following steps can be used as an interim measure to start the engine if the “ENGINE START STOP” switch is functioning normally:
- Set the parking brake.
- Shift the shift lever to P.
- Set the “ENGINE START STOP” switch to ACCESSORY mode.
- Press and hold the “ENGINE START STOP” switch for about 15 seconds while depressing the brake pedal firmly.
Even if the engine can be started using the above steps, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer.
If the engine will not startIf the engine will not start even though correct starting procedures are being followed, consider each of the following points: ■ The engine will not start even though the starter motor o ...
(1) To block glare from the front, swing down the main sun visor. (2)- To block glare from the side, remove the main sun visor from the center mount and swing the visor to the side. ...
Illuminated Entry System When the illuminated entry system operates, the overhead light (switch is in the DOOR position), the courtesy lights and the ground illumination light turn on for: - Abo ...
Onboard Diagnostic System — OBD II
Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.