Toyota RAV4 Owners Manual: Back door
The back door can be locked/unlocked and opened/closed by the following procedures.
Locking and unlocking the back door
- Door lock switch
- Entry function (if equipped)
- Wireless remote control
Opening/closing the back door from inside the vehicle (vehicles with a power back door)
Press and hold the switch to open or close, when the power back door is unlocked. (A buzzer sounds.)
Pressing the switch while the back door is opening/closing stops the operation.
Side doorsUnlocking and locking the doors The vehicle can be locked and unlocked using the key, entry function, wireless remote control or door lock switch. Entry function (if equipped) Wireless remote cont ...
Zero point calibration Notice: Make sure that the front passenger seat is not occupied before performing the operation. Hint: Perform the zero point calibration and sensitivity check if any of the following conditions apply. The occupant classification ecu is replaced. Accessories ( ...
Notice: Perform the reset memory procedures (a/t initialization) when replacing the automatic transaxle assembly, engine assembly or ecm (see page ax-18). Hint: Reset memory cannot be completed by only reconnecting the cable to the negative (-) battery terminal. Caution: When using compresse ...
Solar sensor circuit (driver side)
Description The solar sensor, which is installed on the upper side of the instrument panel, detects sunlight and controls the air conditioning auto mode. The output voltage from the solar sensor varies in accordance with the amount of sunlight.