Toyota Sienna Service Manual: Removal

Toyota Sienna Service Manual: Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE STEERING WHEEL NO. 2 LOWER COVER

3. REMOVE STEERING WHEEL NO. 3 LOWER COVER

4. REMOVE HONE BUTTON ASSEMBLY

5. REMOVE STEERING PAD SWITCH LH

REMOVE STEERING PAD SWITCH LH

  1.  Disconnect the connector.
  2. Disconnect the connector of cruise control main switch.
  3.  Remove the screw.

REMOVE STEERING PAD SWITCH LH

  1. w/o Laser radar cruise control:
  1.  Release the 2 pin fittings and remove the steering pad switch LH.

REMOVE STEERING PAD SWITCH LH

  1. w/ Laser radar cruise control:
  1.  Remove the clamp.
  1.  w/ Laser radar cruise control:
  1. Release the 2 pin fittings and release the steering pad switch LH from steering wheel.

REMOVE STEERING PAD SWITCH LH

  1. w/ Laser radar cruise control:
  1.  Release the tab of steering pad switch cable from steering pad switch LH as shown in the illustration.

REMOVE STEERING PAD SWITCH LH

  1. w/ Laser radar cruise control:
  1.  Disengage the 2 claws as shown in the illustration and open the latch on the top of the connector.

REMOVE STEERING PAD SWITCH LH

  1. w/ Laser radar cruise control:
  1.  Pull out the connector while pinching the latch with fingers and disconnect the steering pad switch cable from the steering pad switch LH.
Inspection
1. INSPECT STEERING PAD SWITCH LH (w/o Navigation System)  Measure the resistance according to the values in the table below. Standard resistan If the result is not as specifie ...
Other materials:

Throttle / Pedal Position Sensor/ Switch
DTC P2120 Throttle / Pedal Position Sensor / Switch "D" Circuit DTC P2122 Throttle / Pedal Position Sensor / Switch "D" Circuit Low Input DTC P2123 Throttle / Pedal Position Sensor / Switch "D" Circuit High Input DTC P2125 Throttle / Pedal Position Sensor / Switch ...

Disassembly
1. REMOVE 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY (a) Place SST on the return spring and compress the return spring with a press. SST 09387-00060 (b) Using a screwdriver, remove the snap ring. (c) Remove the 2nd brake piston return spring. 2.

Related news

  • Kia Soul: How does the air bag system operate
  • Chevrolet Sonic Repair Manual: Airbag Front Passenger Presence Sensor Replacement
  • Toyota Sienna Service Manual: Position Sensor Circuit
  • Toyota RAV4 Service Manual: Brake rear brake flexible hose
  • Using a flat-bed truck

  • Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal

    Toyota Sienna Service Manual: Removal